Code: 8800
Description: The eject sensor does not detect paper pass after the registration rear sensor detected the end of paper pass.
Causes: 1 Foreign object inside the machine. 2 Eject actuator caught in some sections of the machine. 3 Eject sensor failure. 4 Main PCB failure.
Remedy: 1 Foreign object inside the machine Remove the foreign object. 2 Eject actuator caught in some sections of the machine Reattach the eject actuator. 3 Eject sensor failure Refer to "1.3.10 Check sensor operation (function code: 32)" in Chapter 5 to check the sensor operation. If the sensor operation is faulty, replace the eject sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.