Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.12 — Lexmark C748de

Code: 920.12

Description: POST Error
One toner sensor is not connected.
Remedy: 1 Remove the left cover. See “Left cover removal”. Check all the toner level sensor cables connected to the rear of the HVPS. Are any of the cables damaged? Replace the damaged sensor. See “Toner level sensor removal”. Go to step 2.
2 Disconnect the cable in the connector JHVPS1 from the system board and the HVPS. Check for the following continuity. Is continuity present? Go to step 3. Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”
3 Reconnect the HVPS cable. Disconnect one of the toner level sensors and POR the printer. Does the 920.12 error occur again? Replace the toner level sensor. See “Toner level sensor removal”. Repeat the step for the other toner level sensors. After all the sensors are tested without the 920.12 recurring, the problem is resolved.

← Xem tất cả mã lỗi Lexmark C748de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie