Code: 920.16
Description: POST Error
Bad printhead NVRAM data.
Bad printhead NVRAM data.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the large printhead cable in connector (A). Does the error clear? Problem resolved. Go to step 2.
2 Check the cable in connector JPH1 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the printhead. See “Printhead removal, installation, and adjustment”. Go to step 3.
3 Perform the printhead verification to check whether the printhead replacement fixes the problem. See “Printhead verification”. POR the printer. Did the error clear? Replace the printhead. See “Printhead removal, installation, and adjustment”. Replace the system board. See “System board removal”.
2 Check the cable in connector JPH1 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the printhead. See “Printhead removal, installation, and adjustment”. Go to step 3.
3 Perform the printhead verification to check whether the printhead replacement fixes the problem. See “Printhead verification”. POR the printer. Did the error clear? Replace the printhead. See “Printhead removal, installation, and adjustment”. Replace the system board. See “System board removal”.