Code: 906.01...906.04
Description: Motor (fuser) error service check
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cables in connectors JCARTP1 (A) and JCARTS1 (B) (cartridge motor 1/ fuser motor cable) for proper connection to the system board, for cable pinch points, and for any other damage to the cable or connectors. Is either cable damaged? Replace the cartridge motor1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 2.
2 Remove the right cover. See “Right cover removal”. Check the cartridge motor 1/fuser motor cable for proper connection to the EP drive assembly (A), for pinch points for the cable, and for cable or connector damage. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 3.
3 Measure the resistance across fuse F6 (A) on the system board. Is the fuser blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
2 Remove the right cover. See “Right cover removal”. Check the cartridge motor 1/fuser motor cable for proper connection to the EP drive assembly (A), for pinch points for the cable, and for cable or connector damage. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 3.
3 Measure the resistance across fuse F6 (A) on the system board. Is the fuser blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.