Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 148 — Lexmark C750

Code: 148

Description: Motor ITU belt motor, unable to lock
Remedy: 1 Connector J30 on the system board - Check for correct installation of the ITU drive motor cable from the ITU drive motor to the system board connector J30. Is the cable connected correctly? Go to step 2 Install the cable correctly 2 ITU drive motor - Check for continuity between pin 4 of CON1 on the motor drive card and the remaining pins in the connector. Do you measure continuity? Note: The ITU drive motor can be removed from the printer without removing the complete ITU drive motor assembly. If the ITU drive motor assembly is removed be careful not to spill toner that may be contained in the auger system. Replace the drive motor Go to step 3 3 ITU drive motor cable - Check the continuity of the ITU drive motor cable. Do you measure continuity? Go to step 4 Replace the ITU drive motor cable 4 ITU drive motor voltage check - Measure the voltage on connector J30 on the system board. The voltages are approximately values. Voltages with motor not running Are the voltages correct? Replace the drive motor Go to step 5 5 ITU motor drive assembly - Remove the ITU assembly. Manually turn the motor. The gears in the ITU motor assembly, the second transfer roll gears, and the cleaner gear should turn freely. Do the gears turn freely? Replace the system board. If this does not fix the problem, replace the ITU drive motor. Go to step 6 6 ITU motor drive assembly - Remove the ITU drive motor assembly. Manually turn the motor. Do the gears on the ITU drive motor assembly turn freely? Contact your next level support Replace the ITU motor drive assembly

← Xem tất cả mã lỗi Lexmark C750

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie