Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200 — Lexmark C750

Code: 200

Description: Primary: This message indicates that a paper jam has occurred at or near the printer Input Sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled.
Remedy: 1 Does media feed correctly from Tray 1? Go to step 2 Go to “200 Paper Jam— Tray 1” 2 Check the tray 2 for proper media loading. Media should be fanned before loading and must lay flat in the tray. Is the media loaded properly? Go to step 3 Load media properly. 3 Check tray 1 pass through for damage or obstructions. Note: Remove the paper drawer to inspect tray 1 pass through. Is the pass through damaged or obstructed? Remove obstruction or replace damaged parts. Go to step 4 4 Remove duplex and check the pass through. • Check the alignment pin on top of the 500-sheet option • Check the pass through roller drive system on top of tray 2 • Check the pass through the roller drive system on the bottom of the duplex option. Replace the duplex option or 500-sheet option as needed.

← Xem tất cả mã lỗi Lexmark C750

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie