Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 990 — Lexmark C750

Code: 990

Description: <device> This error message indicates that an equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. Note: <device> can be one of the following: • Duplex option • Tray x (where x=1,2,3,4, or 5) • Output bin x (where x=1,2,3, or 6) Note: This message is used for single bin output devices. Output bin x to y (where x=1 to 5, 2 to 6, or 6 to 20) Note: This message is used for multiple bin output devices. Go to the service check for the device indicated.
Remedy: 1 Make sure the autocompensator cable is correctly installed at the tray system board. Is the cable correctly installed? Go to step 2 Install the cable correctly 2 Make sure the drive assembly cable is connected correctly to the tray system board. Is the cable correctly installed? Go to step 3 Install the cable correctly 3 Check for worn or broken parts in the autocompensator and drive assemblies. Are any parts worn, broken, or damaged? Replace the assembly that has the defective parts Replace the FRUs in the following order: 1. Electronic/ size sensing assembly 2. Autocompensator assembly 3. Drive Assembly

← Xem tất cả mã lỗi Lexmark C750

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie