Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 128 — Lexmark C760

Code: 128

Description: Fuser Error Fuser under temperature in standby - hot roll.
Remedy: 1 Turn the printer on and allow it to reach a Ready prompt. Note: The printer may not complete POR and continue to display the 128 Error message. Remove the fuser assembly from the printer. Measure the voltage on connector J33-6 on the system board. The voltage should measure approximately 3.3 V dc. Is the voltage correct? Go to step 2 Replace the “System board”. 2 Measure the voltage on the fuser DC control connector on the LVPS. Measure the voltage on pin 6 of the connector. Does the voltage measure approximately +3.3 V dc. Replace the“Fuser assembly”. Replace the “LVPS assembly”.

← Xem tất cả mã lỗi Lexmark C760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie