Description: Cartridge Sensor Error An error has occurred in a cartridge sensor. 133.01 = black, 133.02 = cyan, 133.03 = magenta, and 133.04 = yellow. 133.05 = A timeout error has occurred while waiting for the indicated cartridge.
Remedy: 1 Turn the printer off and open the system board shield. Check the cables in the indicated connectors for proper connection to the system board. The cables are interchangeable on the terminals, so check all four cables for any 133.xx error. Are the cables properly connected? Go to step 2. Reseat the cable. 2 Check the cables in the indicated connectors for proper connection to the system board. 133.01 or 133.05 Black—D (JCMKM1) 133.02 or 133.05 Cyan—C (JCMCY1) 133.03 or 133.05 Magenta—D (JCMKM1) 133.04 or 133.05 Yellow—C (JCMCY1) Are the cables properly connected? Go to step 3. Reseat the cable. 3 Check the cables in connectors JCMKM1 and JCMCY1 for damage, and then remove all four cartridges and check the other ends of the cables connected to the sensors on the memory blocks. 133.01 or 133.05 Black—B (JCMKM1) 133.02 or 133.05 Cyan—A (JCMCY1) 133.03 or 133.05 Magenta—B (JCMKM1) 133.04 or 133.05 Yellow—A (JCMCY1) Is either cable damaged? Replace the cable. Go to step 3. 4 Replace the indicated cartridge memory block. See “Cartridge memory block removal”. Did this fix the problem? Problem solved. Replace the system board. See “System board removal”.