Description: 203.01 Redrive bubble sensor is made when the printer powers up or covers are closed. 203.02 Paper hit the redrive bubble sensor too soon. Possible causes: • Damaged redrive bubble sensor or redrive bubble sensor flag • Loose redrive bubble sensor 203.03 Redrive bubble sensor is never made or is made late. Possible cause: Faulty redrive bubble sensor 203.04 Redrive bubble sensor flag broke early. Possible causes: • Incorrect paper settings • Defective redrive bubble sensor 203.07 Redrive bubble sensor does not break or breaks late. Possible causes: • Incorrect paper settings • Redrive bubble sensor failure 203.08 Redrive bubble sensor is never made or is made late
Remedy: 1 Open the left access door, and remove the fuser. Check the redrive bubble sensor flag for damage. Is the redrive bubble sensor flag damaged? Replace the paper path redrive assembly. See “Paper path redrive assembly with sensors removal”. Go to step 2. 2 Turn the printer off, and open the system board shield. Check the cable in connector JRDR1 for proper connection to the system card. Is the cable properly connected? Go to step 3. Reseat the cable. 3 Replace the paper path redrive assembly. See “Paper path redrive assembly with sensors removal” Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.