Description: Input sensor does not break or breaks late. Possible causes: • Incorrect paper settings • Incorrect paper loading • Incorrect paper guide setting • ITU module failure • Lower guide failure • Paper pick mechanism failure • Input sensor failure
Remedy: 1 Reseat the ITU. Did the error clear? Problem solved. Go to step 2. 2 Open the left access door. Check the input sensor flag (A) for damage. Is the input sensor flag damaged? Replace the input sensor See “Sensor (input, S1, narrow media, near narrow media) removal”. Go to step 3. 3 Is the staging deflector assembly damaged? Replace the staging deflector assembly. See “Staging deflector assembly removal”. Go to step 4. 4 Replace the ITU. Did the error clear? Problem solved. Go to step 5. 5 Remove the staging deflector assembly. See “Staging deflector assembly removal”. Is the cable connected correctly? Go to step 6. Reseat the cable. 6 Replace the input sensor. See “Sensor (input, S1, narrow media, near narrow media) removal”. Does the error reoccur? Replace the System Board. See “System board removal” Problem solved