Description: 200.43 Narrow media sensor is never made or is made late. 200.48 Narrow media sensor is never made or is made late.
Remedy: 1 Remove the input tray. Are the pick tires worn? Replace the pick tires. See “Pick rolls removal”. Go to step 2. 2 Open the left access door. Check the narrow media sensor flag (C) for damage. Is the narrow media sensor flag damaged? Replace the narrow media sensor flag. See “Sensor (input, S1, narrow media, near narrow media) removal”. Go to step 3. 3 Is the staging deflector assembly damaged? Replace the staging deflector assembly. See “Staging deflector assembly removal”. Go to step 4. 4 Turn the printer off, and open the system board shield. Check the cable in connector JPP2 for proper connection to the system board. Is the cable properly connected? Go to step 5. Reseat the cable. 5 Check the cable in connector JPP2 for any other damage. Is the cable damaged? Replace the paper path cable. See “Paper path cables”. Go to step 6. 6 Remove the staging deflector assembly. See “Staging deflector assembly removal”. Is the cable connected correctly? Go to step 7. Reseat the cable. 7 Replace the narrow media sensor. See “Sensor (input, S1, narrow media, near narrow media) removal”. Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.