Description: ITU Motor Error An error has occurred in the ITU motor.
Remedy: 1 Turn the printer off, open the system board shield, and remove the connector shield. Check the cable in connector JKI1 (BLDC K & ITU cable) for proper connection to the system board. Is the cable properly connected? Go to step 2. Reseat the cable. 2 Check the cable in the connector JKI1 (BLDC K & ITU cable) for damage. Is the cable damaged? Replace the BLDC K & ITU cable. See “EP drive assembly removal”. Go to step 3. 3 Remove the rear cover. See “Rear cover removal”. Check the cable connection to the ITU motor. Is the cable properly connected? Go to step 4. Reseat the cable. 4 Replace the EP drive assembly. See “EP drive assembly removal”. Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.