Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 241.04, 241.05, 241.07 — Lexmark C792dhe

Code: 241.04, 241.05, 241.07

Description: 241.04 S1sensor flag broke early. Possible cause: • Incorrect paper settings • Defective S1 sensor • Faulty system board 241.05, 241.07 While feeding from tray 1, the S1 input sensor is never made. Possible causes: • Incorrect paper loading • Incorrect paper guide setting • Pick rolls (tires) failure • Paper pick mechanism failure • System board failure
Remedy: 1 Open the left access door. Check the sensor flag for damage. A—Input sensor B—S1 sensor C—Narrow media sensor D—Near narrow media sensor Is the sensor flag damaged? Replace the input sensor. See “Sensor (input, S1, narrow media, near narrow media) removal”. Go to step 2. 2 Turn the printer off, and open the system board shield. Check the cable in connector JPP2 for proper connection to the system board. Is the cable properly connected? Go to step 3. Reseat the cable. 3 Check the cable in connector JPP2 for damage. Is the cable damaged? Replace the paper path cable. See “Paper path cables”. Go to step 4. 4 Remove the staging deflector assembly, and check the sensor cable connection. See “Staging deflector assembly removal”. A—Input sensor B—S1 sensor C—Narrow media sensor D—Near narrow media sensor Is the cable properly connected? Go to step 5. Reseat the cable. 5 Replace the sensor. “Sensor (input, S1, narrow media, near narrow media) removal” Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark C792dhe

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie