Description: Electronics Hardware Error A waste toner full sensor not connected error occurred.
Remedy: 1 Turn the printer off, and open the system board shield. Check the cable in connector JWTBF1 for proper connection to the system board. Is the cable properly connected? Go to step 2. Reseat the cable. 2 Check the cable for damage. Is the cable damaged? Replace the waste toner cable. See “Waste toner full cable removal”. Go to step 3. 3 Remove the waste toner full sensor. See “Waste toner full sensor removal”. Check the cable connected to the sensor. Is the cable properly connected? Go to step 4. Reseat the cable. 4 Replace the waste toner full sensor. See “Waste toner full sensor removal”. Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.