Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 201.03, 201.05, 201.07, 201.08 — Lexmark C792dte

Code: 201.03, 201.05, 201.07, 201.08

Description: 201.03 Bubble sensor is never made or is made late. Possible causes: • Faulty bubble sensor • Faulty fuser connection 201.05, 201.07, 201.08 Bubble sensor is never made or is made late.
Remedy: 1 Replace the fuser. Did the problem clear? Problem solved. Go to step 2. 2 Open the system board shield. Check the cable in connector JFSR1 for proper connection to the system card. Is the cable connected correctly? Go to step 3. Reseat the cable. 3 Check the cable for damage. Is the cable damaged? Replace the fuser system card and LVPS cable. See “Fuser system card and LVPS cable removal”. Go to step 4. 4 Open the left access door, remove the two screws (A), and pull out the fuser autoconnect enough to check the cable for proper connection. Is the cable connected correctly? Go to step 5. Reseat the cable. 5 Check the cable for damage. Is the cable damaged? Replace the fuser system card and LVPS cable. See “Fuser system card and LVPS cable removal”. Reseat the cable.

← Xem tất cả mã lỗi Lexmark C792dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie