Description: Electronics Hardware Error A duplex motor failure occurred.
Remedy: 1 Open the left access door assembly, and check the duplex assembly gears for damage. Is the duplex assembly damaged? Replace the duplex assembly. See “Duplex assembly removal”. Go to step 2. 2 Turn the printer off, and open the system board shield. Check the cable in connector JDUPL1 (Duplex motor cable) for proper connection to the system board. Is the cable properly connected? Go to step 3. Reseat the cable. 3 Check the cable for damage. Is the cable damaged? Replace the duplex motor cable. See “Staging paper path reference edge assembly removal” to access the cable. Go to step 4. 4 Remove the rear cover and the left cover. See“Rear cover removal” and “Left cover removal”. Check the cable connection to the duplex motor. Is the cable connected correctly to the motor? Go to step 5. Reseat the cable. 5 Replace the housing interlock assembly. See “Housing interlock assembly removal”. Dose the error reoccur? Replace the system board. See “System board removal”. Problem solved.