Code: 984
Description: Yellow Gear Sensor Error
Remedy: 1 Is connector CN20 on the printer controller board connected properly? Go to step 2. Plug the connector in securely.
2 Check the cable running to CN20 for damage. Is the cable damaged? Replace the cable. Go to step 3.
3 Clean the gear sensor. Does this correct the problem? Problem solved. Go to step 4. 4 Replace the sensor card. Did this resolve the problem? Problem solved. Replace the drive unit.
2 Check the cable running to CN20 for damage. Is the cable damaged? Replace the cable. Go to step 3.
3 Clean the gear sensor. Does this correct the problem? Problem solved. Go to step 4. 4 Replace the sensor card. Did this resolve the problem? Problem solved. Replace the drive unit.