Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 82 — Lexmark C925

Code: 82

Description: Waste Toner Missing
Remedy: 1 • Open the front door and lower the inner photoconductor locking door. • Pull the toner bottle out, and push it back in to position. • Close the photoconductor locking unit door. Did this fix the problem? Problem solved. Tell the customer that this issue can occur. Instruct them to perform the procedure performed in step 1. Go to step 2. 2 Clean the waste toner bottle sensor of any debris or toner. Did this fix the issue? Problem solved Go to step 3. 3 Check the cable connecting the waste toner sensor to CN9 on the engine board. Is the cable properly connected at both ends? Go to step 5. Go to step 4. 4 Reconnect the cable at both ends. Did this fix the problem? Problem solved. Go to step 5. 5 Check the cable for continuity. Is there continuity? Go to step 7. Go to step 6. 6 Replace the waste toner sensor cable. Did this fix the problem? Problem solved. Go to step 7. 7 Replace the waste toner sensor. Did this fix the problem? Problem solved. Go to step 8. 8 Replace the engine board. Did this fix the problem? Problem solved. Contact your second level of support.

← Xem tất cả mã lỗi Lexmark C925

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie