Code: 200.03
Description: Paper jam Sensor (media on belt) late jam
Remedy: 1 Check the media condition. Is the media in the tray crumpled, curled or damaged? Replace the damaged media with new. Go to step 2. 2 Check the media position. Does the media touch the sensor (media on belt)? Remove the media. Go to step 3. 3 Check the 2nd transfer roll assembly for excess wear or damage. Is the above component free of excess wear and damage? Go to step 4. Replace the 2nd transfer roll assembly. Go to “2nd transfer roll assembly removal”. 4 Check the sensor (media on belt) for proper operation. 1. Enter the Diagnostics Menu. 2. Select BASE SENSOR TEST. 3. Select Media Path. 4. Select Media on belt. Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? Go to step 6. Go to step 5. 5 Check the sensor (media on belt) for proper connection. Is the above component properly connected? Replace the sensor (media on belt). Go to “Sensor (media on belt) removal”. Replace the connection. 6 Perform a print test. Does the error continue? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved.