Code: 34
Description: Incorrect paper type, check tray 2 Tray 2 media type mismatch error
Remedy: 1 Check the media tray assembly 2 for the correct media type. Does the above tray contain the correct type of media? Go to step 2. Install the correct media. 2 Check the media tray assembly 2 for the transparencies. Does the media tray 1 assembly contain transparencies? Ensure that the media tray assembly is supposed to be configured for transparencies or replace them with standard media. Go to step 3. 3 Check the sensor (transparency detect) for proper operation. 1. Enter the Diagnostics Menu. 2. Select BASE SENSOR TESTS. 3. Select Media path. 4. Select Transparency detect Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? Go to step 5. Go to step 4. 4 Check the sensor (transparency detect) for proper connection. Is the above component properly connected? Replace the sensor (transparency detect). Go to “Sensor (transparency detect) removal”. Replace the connection. 5 Perform a POR. Does the error remain when the power is turned off/on? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved. 6 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP card assembly. Go to “RIP card assembly removal”. Problem solved.