Remedy: 1 Check the media position in the area shown on the operator panel. Is media present in the area shown on the operator panel? Remove the media. Go to step 2. 2 Check the sensor in the appropriate area for proper operation. 1. Enter the Diagnostics Menu. 2. Select BASE SENSOR TEST. 3. Select Media Path. 4. Select Registration. Does the display on the operator panel, change every time the sensing area of the appropriate sensor is interrupted or blocked? Go to step 4. Go to step 3. 3 Check the appropriate sensor for proper connection. Is the above component properly connected? Replace the appropriate sensor. Replace the connection. 4 POR the machine. Does the error continue? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved.