Code: 242.01
Description: Paper jam Sensor (tray 1 feed-out) late jam (feeding from tray 2)
Remedy: 1 Check the media condition. Is the media in the tray crumpled or damaged? Replace the damaged media with new. Go to step 2. 2 Check the media position. Does the media touch the sensor (tray 1 feed-out)? Remove the media. Go to step 5. 3 Check the sensor (tray 1 feed-out) for proper operation. 1. Enter the Diagnostics Menu. 2. Select INPUT TRAY TESTS. 3. Select Sensor test. 4. Select Tray 1. 5. Select Feed-out. Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? Go to step 5. Go to step 4. 4 Check the sensor (tray 1 feed-out) for proper connection. Is the above component properly connected? Replace the sensor (tray 1 feed-out). Replace the connection. 5 Check the sensor (tray 2 feed-out) for proper operation. 1. Enter the Diagnostics Menu. 2. Select INPUT TRAY TESTS. 3. Select Sensor test. 4. Select Tray 2. 5. Select Feed-out. Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? Go to step 7. Go to step 6. 6 Check the sensor (tray 2 feed-out) for proper connection. Is the above component properly connected? Replace the sensor (tray 2 feed-out). Replace the connection. 7 Check the MPF/transport drive motor for proper operation. Caution: When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Select MOTOR TESTS. 3. Select Printer motor tests. 4. Select MPF/transport drive motor. Does the above component operate properly? Go to step 9. Skip to step 8. 8 Check the MPF/transport drive motor for proper connection. Is the above component properly connected? Replace the MPF / transport drive motor. Go to “MPF / transport drive motor assembly removal”. Replace the connection. 9 Perform a print test. Does the error continue? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved.