Code: 944.01
Description: Service tray 4 failure Sensor (media level) late error (tray 4)
Remedy: 1 Check the media. Is media loaded in tray 4 properly? Go to step 2. Load media properly. 2 Check the sensor (media level) (tray 4) for proper operation. 1. Enter the Diagnostics Menu. 2. Select INPUT TRAY TESTS. 3. Select Sensor Test. 4. Select Tray 4. 5. Select Media level. Does the display on the operator panel, change every time the media tray is opened and closed? Go to step 4. Go to step 3. 3 Check the sensor (media level) (tray 4) for proper connection. Is the above component properly connected? Replace the sensor (media level). Go to “Sensor (media level) removal”. Replace the connection. 4 Check the media feed/lift motor (tray 4) for proper operation. Caution: When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Select MOTOR TESTS. 3. Select Tray 4 media feed/lift motor. Warning: The media tray must be opened before performing this test or paper jam may occur. Does the above component operate properly? Go to step 6. Go to step 5. 5 Check the media feed/lift motor (tray 4) for proper connection. Is the above component properly connected? Replace the media feed/lift motor. Go to “Media feed lift motor removal”. Replace the connection. 6 Perform a POR. Does the error continue when the power is turned off/on? Replace the upper printer engine card assembly. Go to “Upper printer engine card assembly removal”. Problem solved.