Description: Service system board error RIP card assembly cooling fan failure
Remedy: 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Go to step 3. Problem solved. 3 Check the RIP card assembly cooling fan and heatsink attachment. Is the above fan attached properly? Replace the RIP PCBA. Go to “RIP PCBA removal” . Reattach the RIP card assembly cooling fan and heatsink.