Code: 141.0x...141.27
Description: 141.0x Service Cartridge Motor Cartridge motor error 141.01 Service Cartridge Motor Failed to achieve lock for motor within allotted time. 141.02 Service Cartridge Motor Time out waiting for SAP BLDC motor to reach valid FG speed. 141.03 Service Cartridge Motor Time out waiting for MP_NUM_INITIAL_SAP_HALLS. 141.05 Service Cartridge Motor Lost lock for motor. 141.06 Service Cartridge Motor Excessive SAP BLDC PWM. 141.07 Service Cartridge Motor Motor stalled in timebased communication. 141.2x Service Cartridge Motor Cyan/magenta/yellow cartridge motor error. 141.21 Service Cartridge Motor Failed to achieve lock for motor within allotted time. 141.22 Service Cartridge Motor Time out waiting for SAP BLDC motor to reach valid FG speed. 141.23 Service Cartridge Motor Time out waiting for MP_NUM_INITIAL_SAP_HALLS. 141.24 Service Cartridge Motor Time out waiting for SAP BLDC motor. 141.25 Service Cartridge Motor Lost lock for motor. 141.26 Service Cartridge Motor Excessive SAP BLDC PWM. 141.27 Service Cartridge Motor Motor stalled in timebased communication.
Remedy: Step 1 Turn the printer off, and remove the rear cover. See “Rear cover removal”. Check the cable JCARTB1 for proper connection to the system board. Is the cable properly connected? Reseat the cable.
Step 2 Check the cable for damage. Is the cable damaged? Replace the BLDC K transfer module cable. See “Transfer module removal”.
Step 3 Remove the left cover assembly. See “Left cover assembly removal” Check the cables connected to the cartridge motor assembly. Is the cable connected properly? Go to step 4. Reseat the cable.
Step 4 Replace the EP drive assembly. See “EP drive assembly removal”. Does the problem remain? Replace the controller board. See “Controller board removal”. Problem solved.
Step 2 Check the cable for damage. Is the cable damaged? Replace the BLDC K transfer module cable. See “Transfer module removal”.
Step 3 Remove the left cover assembly. See “Left cover assembly removal” Check the cables connected to the cartridge motor assembly. Is the cable connected properly? Go to step 4. Reseat the cable.
Step 4 Replace the EP drive assembly. See “EP drive assembly removal”. Does the problem remain? Replace the controller board. See “Controller board removal”. Problem solved.