Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202.x5 — Lexmark CS720

Code: 202.x5

Description: 202.15 Paper fed from tray 1 never cleared the sensor (fuser exit). 202.25 Paper fed from tray 2 never cleared the sensor (fuser exit). 202.35 Paper fed from tray 3 never cleared the sensor (fuser exit). 202.45 Paper fed from tray 4 never cleared the sensor (fuser exit).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the redrive paper path for paper jams and fragments. Is the paper path free of jams and fragments? Go to step 5. Go to step 4. Step 4 Remove the jams and fragments. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the fuser for obstructions. Is the fuser free from obstructions? Go to step 7. Go to step 6. Step 6 Remove the obstructions in the fuser area. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the fuser for damage or life expiration, and replace if necessary. See “Fuser removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Fuser exit). Does the sensor status change while toggling the sensor? Go to step 11. Go to step 9. Step 9 a Make sure that the fuser is seated properly. b Check the cable on the JFSNS connector on the controller board for proper connection, and reseat if necessary. Does the problem remain? Go to step 10. The problem is solved. Step 10 Check the sensor for damage, and replace if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Fuser b Select a setting, and then touch Start. Does the motor run? Contact the next level of support. Go to step 12. Step 12 Check the motor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 13. The problem is solved. Step 13 a Replace the motor. See “Motor (fuser) removal”. b Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS720

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie