Code: 240.82, 240.84
Description: 240.82 The motor (duplex/MPF) has stalled. 240.84 The motor (duplex/MPF) failed to achieve expected speed or has stalled.
Remedy: Step 1 Check if this is a duplex issue. Is this a duplex issue? Go to step 6. Go to step 2. Step 2 Check the MPF tray for overfilling. Is the tray overfilled? Go to step 3. Go to step 4. Step 3 Remove the excess paper from the tray. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the paper condition in the MPF tray. Is the paper crumpled or damaged? Go to step 5. Go to step 6. Step 5 Replace the crumpled or damaged paper. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the duplex and MPF paper path exiting tray 1. Is the paper path free of fragments and contamination? Go to step 7. Go to step 8. Step 7 Clean the paper path. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Duplex/MPF b Select a setting, and then touch Start. Does the motor run? Contact the next level of support. Go to step 9. Step 9 Check the cable on the JMTR1 connector on the controller board for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 10. The problem is solved. Step 10 a Replace the motor (duplex/MPF). See “Motor (duplex/MPF) removal”. b Perform a duplex or MPF feed test. Does the problem remain? Contact the next level of support. The problem is solved.