Remedy: Step 1 Warning—Potential Damage: Do not perform this step if the printer is on. a Reseat the hardware option cables. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the firmware version of the hardware option if it is supported by the engine firmware. Update the firmware if necessary. Note: Contact the next level of support for the correct firmware version. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the hardware option controller board pins for damage, and replace if necessary. Does the problem remain? Contact the next level of support. The problem is solved.