Description: No paper is loaded for the ADF scan job.
Remedy: Step 1 a Load the scan documents properly in the ADF tray. b Reset the printer, and then perform an ADF scan job. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Sensor tests b Find the sensor (ADF media present). Does the sensor status change while toggling the sensor? The problem is solved. Go to step 3. Step 3 Reseat or replace the cable on the JADF1 connector on the controller board. Does the problem remain? Contact the next level of support. The problem is solved.