Description: The printhead thermistor reading is out of range.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the cables on the printhead and on the JMIRR1 and JPH1 connectors on the controller board for proper connection. Are the cables properly connected at both ends? Go to step 4. Go to step 3. Step 3 Reconnect the cables. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the printhead cable for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the printhead. See “Printhead removal”. Does the problem remain? Go to step 6. The problem is solved. Step 6 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.