Code: 202.x4
Description: 202.14 Paper fed from tray 1 cleared the sensor (fuser exit) earlier than expected. 202.24 Paper fed from tray 2 cleared the sensor (fuser exit) earlier than expected. 202.34 Paper fed from tray 3 cleared the sensor (fuser exit) earlier than expected. 202.44 Paper fed from tray 4 cleared the sensor (fuser exit) earlier than expected.
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the fuser rollers for damage. Are the rollers free of damage? Go to step 5. Go to step 4. Step 4 Replace the fuser. See “Fuser removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Fuser exit). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the fuser. See “Fuser removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.