Description: 82.11 The waste toner bottle is nearly full. The sensor threshold has been reached. 82.19 The waste toner bottle is nearly full. The userselected EWS set point has been reached. 82.31 Replace the waste toner bottle. The sensor end of life threshold has been reached.
Remedy: Step 1 Reseat the waste toner bottle. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check if the printer is placed on a flat surface. Is the printer placed on a flat surface? Go to step 4. Go to step 3. Step 3 Place the printer on a flat surface. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the waste toner bottle contacts and waste toner contact block contacts for dust or debris. Are the contacts free of dust or debris? Go to step 6. Go to step 5. Step 5 Remove the dust or debris. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the waste toner contact block for proper connection and damage, and replace if necessary. Does the problem remain? Contact the next level of support. The problem is solved.