Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 100.05 — Lexmark CS725

Code: 100.05

Description: 100.05A The fuser exit sensor cable is unplugged. 100.05B The fuser nip sensor cable is unplugged.
Remedy: Step 1 Check the error that appeared. Is the error 100.4? Go to step 2. Go to step 3. Step 2 Check the sensor (fuser nip) for proper connection, and reseat if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the sensor (fuser exit) for proper connection, and reseat if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the cable on the JFSNS1 connector on the controller board for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the fuser. See “Fuser removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS725

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie