Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 126, 127 — Lexmark CS725

Code: 126, 127

Description: 126.01 LVPS line voltage error was detected. 126.02 LVPS line voltage error was detected. 126.06 LVPS 25V line error was detected. 126.07 LVPS 5V rail was down during POR. 126.10 No line frequency was detected. 126.11 Line frequency has gone outside the op127.02 HVPS secondary power supply was not detected.erating range. 127.01 HVPS primary power supply was not detected.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the HVPS cable on the JHVPS connector on the controller board for proper connection. Is the cable properly connected at both ends? Go to step 4. Go to step 3. Step 3 Reconnect the cable. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the HVPS. See “HVPS removal”. Does the problem remain? Go to step 6. The problem is solved. Step 6 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS725

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie