Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 147 — Lexmark CS725dte

Code: 147

Description: 147.80 The motor (deskew) did not turn on. 147.81 The motor (deskew) did not turn off. 147.82 The motor (deskew) speed did not ramp up to the required level. 147.83 The motor (deskew) stalled. 147.84 The motor (deskew) ran too slow. 147.85 The motor (deskew) ran too fast. 147.86 The motor (deskew) did not run at the correct timing.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Deskew b Touch Start. Does the motor run? Go to step 3. Go to step 5. Step 3 Turn the aligner and registration rollers. Is there binding or uneven movement when turning the rollers? Go to step 4. Go to step 5. Step 4 Check the aligner roller gears for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the cable on the motor and on the JMTR1 connector on the controller board for proper connection. Is the cable properly connected at both ends? Go to step 7. Go to step 6. Step 6 Reconnect the cable. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 8. The problem is solved. Step 8 Replace the motor. See “Motor (deskew) removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS725dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie