Code: 242.x3
Description: 242.33 Paper fed from tray 3 never arrived at the sensor (tray 2 pass-through). 242.43 Paper fed from tray 4 never arrived at the sensor (tray 2 pass-through). 242.93 Paper never arrived at the sensor (tray 2 passthrough). Paper source is undetermined
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 5. Go to step 4. Step 4 Replace the paper or change the paper size setting in the tray. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the paper tray for overfilling. Is the paper tray overfilled? Go to step 6. Go to step 7. Step 6 Remove the excess paper from the tray. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the paper condition in the tray. Is the paper crumpled or damaged? Go to step 8. Go to step 9. Step 8 Replace the crumpled or damaged paper. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the paper path for partially fed or jammed paper. Is the paper path free of partially fed or jammed paper? Go to step 11. Go to step 10. Step 10 Remove the partially fed or jammed paper. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Sensor tests b Find the sensor (Pass-through (tray 2)). Does the sensor status change while toggling the sensor? Go to step 14. Go to step 12. Step 12 Reseat the sensor cable, and then check the sensor for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 14. Go to step 13. Step 13 Reinstall or replace the sensor. See gSensor (550-sheet tray passthrough) removalh. Does the problem remain? Go to step 14. The problem is solved. Step 14 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Motor tests b Find the motor (Pass-through (tray 2)), and then touch Start. Does the motor run? Go to step 17. Go to step 15. Step 15 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 17. Go to step 16. Step 16 Reinstall or replace the motor. See gMotor (550-sheet tray pass.through) removalh. Does the problem remain? Go to step 17. The problem is solved.