Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 978.xx — Lexmark CS725dte

Code: 978.xx

Description: Bad checksum while programming Standard Network or Network Card x port.
Remedy: Step 1 Make sure that you have downloaded the code in binary mode and not in ASCII, and then reprogram the network card. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check if the network card is intalled. Is the network card installed? Go to step 3. Go to step 4. Step 3 Make sure that the network card is properly installed, and reseat if necessary. Does the problem remain? Contact the next level of support. The problem is solved. Step 4 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS725dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie