Code: 920.04
Description: POST Error
Fuser motor not connected.
Fuser motor not connected.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cables in connectors JCARTP1 (A) and JCARTS1 (B). Does the error clear? Problem resolved. Go to step 2.
2 Check the cartridge motor 1/fuser cable in connector JCARTP1 and JCARTS1 for pinch points and the cables or connectors for any other damage. Are the cables damaged? Replace the cartridge motor1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 3.
3 Remove the right cover.See “Right cover removal”. Check the cartridge motor 1/fuser motor cable (A) for proper connection to the EP drive assembly, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 4.
4 Check the continuity of JCARTP1, pins 4, 5, and 6 and JCARTS1, pins 7 through 12. Is there continuity? Go to step 5. Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”.
5 Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”. Does the error clear? Problem resolved. Replace the system board. See “System board removal”.
2 Check the cartridge motor 1/fuser cable in connector JCARTP1 and JCARTS1 for pinch points and the cables or connectors for any other damage. Are the cables damaged? Replace the cartridge motor1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 3.
3 Remove the right cover.See “Right cover removal”. Check the cartridge motor 1/fuser motor cable (A) for proper connection to the EP drive assembly, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 4.
4 Check the continuity of JCARTP1, pins 4, 5, and 6 and JCARTS1, pins 7 through 12. Is there continuity? Go to step 5. Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”.
5 Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”. Does the error clear? Problem resolved. Replace the system board. See “System board removal”.