Code: 920.13
Description: POST Error
Cartridge motor 1 (top) not connected.
Cartridge motor 1 (top) not connected.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cables in connectors JCARTP1 (A) and JCARTS1 (B). Does the error clear? Problem resolved. Go to step 2.
2 Check the cables in connectors JCARTP1 and JCARTS1 for pinch points and any other damage to the cables or connectors. Is the cable damaged? Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 3.
3 Remove the right cover. Check the cartridge motor 1/fuser motor cable for proper connection to the EP drive assembly, pinch points for the cable, or any other damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 4.
4 Measure the resistance across fuse F7 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
2 Check the cables in connectors JCARTP1 and JCARTS1 for pinch points and any other damage to the cables or connectors. Is the cable damaged? Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 3.
3 Remove the right cover. Check the cartridge motor 1/fuser motor cable for proper connection to the EP drive assembly, pinch points for the cable, or any other damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 4.
4 Measure the resistance across fuse F7 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.