Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 141.80...141.85 — Lexmark CS820

Code: 141.80...141.85

Description: 141.80 The motor (K photoconductor) did not turn on. 141.81 The motor (K photoconductor) did not turn off. 141.82 The motor (K photoconductor) speed did not ramp up to the required level. 141.83 The motor (K photoconductor) stalled. 141.84 The motor (K photoconductor) ran too slow. 141.85 The motor (K photoconductor) ran too fast.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the K photoconductor unit for damage and life expiration. Is the photoconductor unit damaged or has it reached end of life? Go to step 3. Go to step 4. Step 3 Replace the photoconductor unit. See “Repeating defects check”. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Remove the K photoconductor unit, and then manually turn the photoconductor drive gear. b Check the movement of the gear. Does the photoconductor drive gear properly turn? Go to step 6. Go to step 5. Step 5 Replace the photoconductor unit. See “Repeating defects check”. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the controller board sockets JPCS1 and JPCP1 connections. Are the cables properly connected? Go to step 8. Go to step 7. Step 7 Reseat the cables. Does the problem remain? Go to step 8. The problem is solved. Step 8 Check the motor (K photoconductor) connection. Is the motor properly connected? Go to step 10. Go to step 9. Step 9 Reseat the cable. Does the problem remain? Go to step 10. The problem is solved. Step 10 Check the motor (K photoconductor) cable for damage. Is the cable free of damage? Go to step 12. Go to step 11. Step 11 Replace the cable. Does the problem remain? Go to step 12. The problem is solved. Step 12 Reset the printer. Does the problem remain? Go to step 13. The problem is solved. Step 13 Replace the EP/developer/toner add gearbox. See “EP, developer, toner add gearbox removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 Reset the printer. Does the problem remain? Go to step 15. The problem is solved. Step 15 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS820

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie