Code: 242.43, 242.53
Description: 242.43 Paper fed from tray 4 never arrived at the sensor (tray 2 pass-through). 242.53 Paper fed from tray 5 never arrived at the sensor (tray 2 pass-through).
Remedy: Step 1 Check the tray 3 paper path guides for paper jams and fragments. Is the paper path free of jams and fragments? Go to step 3. Go to step 2. Step 2 Remove the paper jams and fragments. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Sensor tests b Find the sensor (Pass-through (tray 2)). Does the sensor status change while toggling the sensor? Go to step 6. Go to step 4. Step 4 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the sensor. Does the problem remain? Go to step 6. The problem is solved. Step 6 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Sensor tests b Find the sensor (Pass-through (tray 3)). Does the sensor status change while toggling the sensor? Go to step 9. Go to step 7. Step 7 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 8. The problem is solved. Step 8 Replace the sensor. Does the problem remain? Go to step 9. The problem is solved. Step 9 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Motor tests > Passthrough (tray 3) b Touch Start. Does the motor run? Go to step 12. Go to step 10. Step 10 Check the motor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 Replace the motor. See gMotor (550-sheet tray pass.through) removalh. Does the problem remain? Go to step 12. The problem is solved. Step 12 Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.