Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced.
Remedy: Step 1 a Make sure that the cartridge or photoconductor unit is installed. b Check if the cartridge or photoconductor unit is supported, and replace if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Make sure that the cartridge or photoconductor unit is properly installed. b Make sure that the cartridge or photoconductor cables are properly connected. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the cartridge or photoconductor contacts for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.