Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 403.13...403.55 — Lexmark CS820dte

Code: 403.13...403.55

Description: 403.13 The hole punch fails to reach home at the specified time. 403.15 The hole punch fails to leave home at the specified time. 403.51 Motor (hole punch unit) did not turn off. 403.54 Motor (hole punch unit) ran too fast. 403.55 Motor (hole punch unit) ran too slow.
Remedy: Step 1 a Check the HPT and multiposition staple, hole punch finisher for proper installation. b Open door K and clear paper jams, fragments, and obstructions along the paper path. c Enter the Diagnostics menu, and then touch Output bin quick feed. d Select a bin and test type, and then start the test. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Manually turn knob K1 and the hole punch unit gears. b Check if the punch rotates with the knob and gears. Does the punch rotate with knob K1 and the gears? Go to step 5. Go to step 3. Step 3 Check the quality of the punched holes on the media. Is the quality of the holes good? Go to step 5. Go to step 4. Step 4 Replace the hole punch unit. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Sensor tests > Horizontal paper transport b Find the sensor (HPU). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 Reseat the sensor cable, and then check the sensor and actuator for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 8. Go to step 7. Step 7 Reinstall or replace the sensor. See “Sensor (hole punch unit) removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Motor tests > Finisher b Find the motor (HPU), and then touch Start. Does the motor run? Go to step 11. Go to step 9. Step 9 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 11. Go to step 10. Step 10 Reinstall or replace the motor. See “Motor (hole punch unit) removal”. Does the problem remain? Go to step 11. The problem is solved. Step 11 Check the hole punch unit gears for misalignment and damage. Are the gears properly installed and free of damage? Go to step 13. Go to step 12. Step 12 Reinstall or replace the gears. See “Hole punch unit gears removal”. Does the problem remain? Go to step 13. The problem is solved. Step 13 Reseat the HPT controller board cables, and then check the cables for damage. Are the cables free of damage? Go to step 15. Go to step 14. Step 14 Replace the cables. See “HPT controller board removal”. Does the problem remain? Go to step 15. The problem is solved. Step 15 Reset the printer. Does the problem remain? Go to step 16. The problem is solved. Step 16 Replace the controller board. See “HPT controller board removal”. Does the problem remain? Go to step 17. The problem is solved. Step 17 Replace the HPT. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CS820dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie