Code: 846.00...846.07
Description: 846.00 Calibration Strip Unusable Scanner failure: Calibration strip 846.01 Rear Calibration Strip Unusable 846.02 Front calibration strip too far left 846.03 Front calibration strip too far right 846.04 Front calibration strip has excessive skew 846.05 Front calibration strip has excessive bow 846.06 Front calibration strip has excessive dark area 846.07 Front magnification exceeds limits
Remedy: Step 1 Restart the device, and retry the scan / copy job. Repeat this step with a few copy jobs. Does the error return? Go to step 2. No issue.
Step 2 Is the CCD ribbon cable properly connected to JCCD1 on the controller board? Go to step 3. Properly connect the ribbon cable to JCCD1.
Step 3 Replace the flatbed unit. See “Flatbed scanner assembly removal”. Did this resolve the issue? Problem resolved. Replace the controller board. See “Controller board removal”.
Step 2 Is the CCD ribbon cable properly connected to JCCD1 on the controller board? Go to step 3. Properly connect the ribbon cable to JCCD1.
Step 3 Replace the flatbed unit. See “Flatbed scanner assembly removal”. Did this resolve the issue? Problem resolved. Replace the controller board. See “Controller board removal”.