Code: 203.91
Description: Paper remains detected at the sensor (bin full) after the printer is turned on.
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the paper path for partially fed or jammed paper. Is the paper path free of partially fed or jammed paper? Go to step 5. Go to step 4. Step 4 Remove the partially fed or jammed paper. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Output bin full). Does the sensor status change while toggling the sensor? Contact the next level of support. Go to step 6. Step 6 Check the cable on the JDSNS connector on the controller board for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 a Check the sensor for damage, and replace if necessary. b Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.