Code: 230.x3
Description: 230.13 Paper fed from tray 1 never arrived at the sensor (duplex path 1). 230.23 Paper fed from tray 2 never arrived at the sensor (duplex path 1). 230.33 Paper fed from tray 3 never arrived at the sensor (duplex path 1). 230.43 Paper fed from tray 4 never arrived at the sensor (duplex path 1).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the redrive paper path for paper jams and obstructions. Is the paper path free of jams and obstructions? Go to step 5. Go to step 4. Step 4 Remove the jams and obstructions. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the duplex paper path for paper jams and obstructions. Is the paper path free of jams and obstructions? Go to step 7. Go to step 6. Step 6 Remove the jams and obstructions. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the diverter for smooth movement. Does the diverter freely move witthout interference? Go to step 9. Go to step 8. Step 8 Replace the diverter. See “Diverter removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Duplex path 1). Does the sensor status change while toggling the sensor? Go to step 11. Go to step 10. Step 10 Replace the sensor. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Redrive b Select a setting, and then touch Start. Does the motor run? Go to step 13. Go to step 12. Step 12 Check the cable on the JOUTDC connector on the controller board for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 13. The problem is solved. Step 13 Replace the motor (output). See “Motor (output) removal”. Does the problem remain? Contact the next level of support. The problem is solved.