Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 244.x7 — Lexmark CX725de

Code: 244.x7

Description: 244.47 Paper fed from tray 4 never cleared the sensor (tray 4 trailing edge). 244.97 Paper never cleared the sensor (tray 4 trailing edge). Paper source is undetermined.
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the paper path for partially fed or jammed paper. Is the paper path free of partially fed or jammed paper? Go to step 5. Go to step 4. Step 4 Remove the partially fed or jammed paper. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Sensor tests b Find the sensor (Trailing edge (tray [x])). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 Reseat the sensor cable, and then check the sensor for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 8. Go to step 7. Step 7 Reinstall or replace the sensor. See “Sensor (550-sheet tray trailing edge) removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests b Find the motor (Duplex/MPF), and then touch Start. Does the motor run? Go to step 11. Go to step 9. Step 9 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 11. Go to step 10. Step 10 Reinstall or replace the motor. See “Motor (duplex/MPF) removal”. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Additional input tray diagnostics > Sensor tests b Find the sensor (Pass-through (tray [x])). Does the sensor status change while toggling the sensor? Go to step 14. Go to step 12. Step 12 Reseat the sensor cable, and then check the sensor for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 14. Go to step 13. Step 13 Reinstall or replace the sensor. See gSensor (550-sheet tray passthrough) removalh. Does the problem remain? Go to step 14. The problem is solved. Step 14 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests b Find the motor (Pass-through (tray [x])), and then touch Start. Does the motor run? Go to step 17. Go to step 15. Step 15 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 17. Go to step 16. Step 16 Reinstall or replace the motor. See gMotor (550-sheet tray pass.through) removalh. Does the problem remain? Go to step 17. The problem is solved. Step 17 Perform a print test. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX725de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie