Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 31.80' — Lexmark CX725de

Code: 31.80'

Description: All fuser sensors are out of range. Reinstall the fuser.
Remedy: Step 1 Check the fuser for proper installation. Is the fuser properly installed? Go to step 3. Go to step 2. Step 2 Reinstall the fuser. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the LVPS cable on the LVPS and on the JFSNS connector on the controller for proper connection. Is the cable properly connected at both ends? Go to step 5. Go to step 4. Step 4 Reconnect the cable. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the fuser cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the fuser. See “Fuser removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Replace the LVPS. See “LVPS removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX725de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie