Description: 241.12 Paper fed from tray 1 covered the sensor (tray 1 pick) earlier than expected. 241.14 Paper fed from tray 1 cleared the sensor (tray 1 pick) earlier than expected.
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the tray for overfilling. Is the tray overfilled? Go to step 4. Go to step 5. Step 4 Remove the excess paper from the tray. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the paper path along the tray exit. Is the paper path free of fragments and contamination? Go to step 7. Go to step 6. Step 6 Clean the paper path. Does the problem remain? Go to step 7. The problem is solved. Step 7 Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.